Summary
– Stacker models
– The manual stacker
– The electric stacker
– The platform stacker
The stacker is the simplest handling tool capable of lifting loads to stack them (stacking).
The stacker is maneuverable and space-saving and is also capable of transporting heavy loads over short distances.
Stacker models
The stacker is a manual or electric handling and lifting device for palletized packages.
It allows an important lifting of the load thanks to a hydraulic cylinder or a manual winch.
Depending on the frequency of handling to be carried out and the distance to be covered, three models of stacker are available:
– the manual stacker,
– the electric stacker,
– the platform stacker.
The manual stacker
– Description:
◦ A low chassis with two arms on wheels, two lifting forks on the mast with a small load shield.
◦ A handle tiller steers the twin wheels and is used to operate by pumping the hydraulic lifting device.
◦ Some manual stackers are equipped with a lifting winch.
Are you looking for used or new stacker trucks for your business? ALLINSON SOLUTIONS has the perfect match for you.
◦ Fixed-mast (non-retractable) front truck equipped with forks manually operated by the driver on the tiller or winch.
◦ Maximum lifting height: 1 m 60 approx.
◦ Lifting speed: approx. 0.2 m/s.
– Lifting equipment: pallet fork, manipulator.
– Motorization:
◦ None, the driver pulls, pushes, and swivels the machine and its load with his own force alone.
◦ Travel speed: 5 to 6 km/h.
– Theoretical load: 1-ton maximum
Please note: the recommended maximum allowable weight is 600 kg for a man under 50 years of age and 360 kg for a woman. For a person over 50, reduce the load by 2/3.
– Wheels: solid polyurethane wheels and solid nylon, rubber, or vulkollan wheels.
– Floor: a smooth, non-slip floor. Maximum slope 5 to 10%.
– Driver:
◦ The walking driver must walk beside the stacker.
◦ Wearing a helmet, safety gloves, and safety shoes is strongly recommended.
– No certification required but adequate training in the company and rules to be observed to avoid accidents like load drop, tiller jamming, and wheels stuck in an obstacle.
The electric stacker
– Description:
◦ A low chassis with two arms on wheels, two lifting forks on a retractable mast, and a high shield housing the motor and batteries.
◦ A swivel tiller with handle combines the electrical controls for the lifting device, the drive motor, and the steering.
– Lifting type:
◦ A front truck with retractable mast equipped with forks electrically controlled by the driver at the tiller.
◦ Maximum lifting height: approx. 6 m.
◦ Lifting speed: approx. 0.2 m/s.
– Lifting equipment: pallet fork
– Motorization: battery electric. Travel speed: 8 to 13 km/h.
– Load: 1 to 2 tonnes.
– Wheels: solid polyurethane wheels and solid nylon, rubber, or vulkollan wheels.
– Floor: smooth and non-slip ground. Maximum slope 5 to 10 %.
– Driver: the driver must wear a helmet, safety gloves, and safety shoes.
– No certification is required but adequate training in the company and rules to be observed to avoid accidents like load drop, tiller jamming, or wheels stuck in an obstacle.
The platform stacker
– Description: a low chassis with two arms on wheels, two lifting forks on a retractable mast, and a high shield housing the motor and batteries. A rear platform serves as an operator’s station for the ride-on operator and houses the electrical controls for the lift, travel motor, and steering.
– Type of lift: Front reach truck with forks electrically controlled by the driver. Maximum lifting height: approx. 5 m. Lifting speed: approx. 0.2 m/s.
– Lifting equipment: pallet fork.
– Motorization: electric on battery. Travel speed: 8 to 13 km/h.
– Load: 1 to 2 tons.
– Wheels: solid polyurethane wheels and solid nylon, rubber, or vulkollan wheels.
– Floor: a smooth and non-slip ground. Maximum slope 5 to 10 %.
– Driver: the ride-on driver must remain seated or standing on the platform with often a part of the body protruding from the platform. Wearing a helmet and safety shoes is strongly recommended.
– A driving license (forklift operator’s license) is compulsory.
Should you be looking for a reliable parts supplier, ALLINSON SOLUTIONS also sells a wide range of heavy-duty automotive parts in South Florida.
Hope the above helps you out in deciding which type of stacker you require for your business. Remember to leave your comments below!
